Roteador sem fio inteligente 4G
Smart 4G Wireless Router LP-R520-4G
◆4G cellular communication seconds to Wi-Fi
◆Support various modes of mobile communication, full and rate guarantee
◆300Mbps wireless, perfect for 4G networks
◆Independent 4G, Wi-Fi antenna, stronger signal
Detalhes
Parâmetro
Detalhes
Parâmetro
| Specification parameter | |
| Cellular function | |
| 3G/4G Internet connection | LTE-FDD, LTE-TDD, DC-HSDPA, HSPA+, HSDPA,HSUPA and WCDMA |
| 3G/4G broadband band | Support A version: North America |
| Support J version: Japan | |
| Supports E version: Europe, Africa, Asia, Brazil | |
| Support C version: China | |
| Support LA version: Latin America, Australia, Taiwan | |
| 3G/4G data rate | LTE |
| LTE FDD. Max. 150Mbps (Downlink)/50Mbps (Uplink) | |
| LTE tdd. Max. 130Mbps (Downlink)/30Mbps (Uplink) | |
| UMTS. | |
| DC-HSDPA. MAX. 42Mbps (Downlink) | |
| HSUPA. Max. 5.76Mbps (Uplink) | |
| WCDMA. Max. 384Kbps (Downlink)/Max 384Kbps (Uplink) | |
| antenna | 2*2 MIMO 4G LTE built-in antenna, impedance 50 Ω |
| SIM card functions | |
| SIM card | Support 1 x SIM card, 1.8V/3V, or 1 x eSIM card (optional) |
| Hardware function | |
| Hardware interface | 1 x LAN 10/100Mbps port, 1 x USB 2.0 interface, 1 x RJ11 VOLTE voice (optional) |
| Watchdog | Built-in watchdog function |
| Key | Reset, WPS |
| LED status indicator light | Power, 5G, Wi-Fi,LAN |
| Power supply | DC 12V/1A |
| Temperature | Operating temperature: 32℉-122℃ |
| Storage temperature: 14℃-131℃ | |
| Humidity | 5%-95% (no condensation) |
| Entrance protection | IP30 |
| Dimensão | 6.2inch×5.0inch×1.5inch |
| Wi-Fi | |
| WLAN | IEEE 802.11AX,Wi-Fi 6 |
| Maximum bandwidth of 300Mbps in the 2T/2R 2.4GHz frequency band | |
| 2.4GHz Supports 20MHz / 40MHz channel bandwidth | |
| Wireless mode | Supports AP mode, client |
| Wireless security | Supports WPA, WPA2,WPAI, WEP, TKIP encryption |
| Software function | |
| Parameter setting | Support automatic detection of MNC and MCC parameters for global operators. Built in global operator APN, username, password and other network parameters. Meanwhile, support manual setting of network parameters. |
| Dialing mode | When the device is powered on, the system automatically dials up and connects to the network |
| protocol | Support PPTP,L2TP,GRE,TCP,UDP,DHCP,HTTP,DDNS,TR-069,HTTPS,SSH and other protocols. |
| Route | Supports static routes and multiple routing tables |
| Network bridge | Support 4G bridge mode function |
| APN network access | Support multiple APN access networks |
| System assurance | Support system auto-detection mechanism, system anomaly or crash automatic recovery |
| Data link assurance | Built-in link maintenance and self-recovery mechanisms |
| Firewall | Support flexible access control for TCP, UDP, and ICMP packets; Supports port mapping, NAT and other functions |
| DDNS | Support some service providers, other service providers can manually configure |
| Firmware upgrade | Support local webUI and remote OTA to upgrade firmware |
| VLAN | Support VLAN function |
| Embedded system | Linux 3.4 |
| Application development | Support secondary development of application functions based on our device motherboard software |