Outdoor Smart 4G Wireless Router LP-610-4G
◆4G cellular communication seconds to Wi-Fi
◆Support various modes of mobile communication, full and rate guarantee
◆300Mbps wireless, perfect for 4G networks
◆Independent 4G, Wi-Fi antenna, stronger signal
◆Outdoor dust and waterproof material, stable weather resistant
Specification parameter | |
Cellular function | |
3G/4G/LTE Internet connection | LTE-FDD, LTE-TDD, DC-HSDPA, HSPA+, HSDPA, HSUPA and WCDMA |
3G/4G broadband band | Support A version: North America |
Support J version: Japan | |
Supports E version: Europe, Africa, Asia, Brazil | |
Support C version: China | |
Support LA version: Latin America, Australia, Taiwan | |
3G/4G/LTE data rate | LTE. |
LTE FDD: Max. 150Mbps (Downlink)/ Max. 50Mbps (Uplink) | |
LTE TDD: Max 130Mbps (Downlink)/Max 30Mbps (uplink) | |
UMTS. | |
DC-HSDPA: Max. 42Mbps (downlink) | |
HSUPA: Up to 5.76Mbps (uplink) | |
WCDMA: Max 384Kbps (downlink)/Max 384Kbps (uplink) | |
GSM. | |
EDGE: Max 296Kbps (downlink)/Max 236.8Kbps (uplink) | |
GPRS: Max 107Kbps (downlink)/Max 85.6Kbps (uplink) | |
antenna | 2×2 MIMO 4G LTE built-in directional antenna, impedance 50 Ω. |
1× GPS antenna (optional) | |
SIM card functions | |
SIM card | Support 1 x SIM card, 1.8V/3V, or 1 x eSIM card (optional) |
Hardware function | |
Hardware interface | 2 x LAN 10/100Mbps port, 1 x USB 2.0 interface, 1 x RJ11 VOLTE voice (optional) |
Watchdog | Built-in watchdog function |
Key | Reset |
LED status indicator light | PWR ,SYS, Net, WAN, LAN,WLAN |
Power supply | DC 18V/1A |
Temperature | Operating temperature: -4℉ – 149℃ |
Storage temperature: -22℃ – 158℃ | |
Humidity | 5%-95% (no condensation) |
Entrance protection | IP30 |
寸法 | 9.9inch×5.8inch×2.7inch |
Wi-Fi | |
WLAN | IEEE 802.11b/g/n |
2.4 GHz supports 20MHz/40MHz channel bandwidth | |
2T/2R 300Mbps maximum bandwidth in 2.4GHz band | |
Wireless mode | Supports AP, client |
Wireless security | Supports Wi Fi authentication for WPA, WPA2, WPAI, WEP, and TKIP protocols |
Software function | |
Parameter setting | Support automatic detection of MNC and MCC parameters for global operators. Built in global operator APN, username, password and other network parameters. Meanwhile, support manual setting of network parameters. |
Dialing mode | When the device is powered on, the system automatically dials up and connects to the network |
protocol | Support PPTP,L2TP,IPSEC VPN,TCP,UDP,DHCP,HTTP,DDNS,TR-069,HTTPS,SSH,SNMP and other protocols. |
Route | Supports static routes and multiple routing tables |
Network bridge | Support 4G bridge mode function |
APN network access | Support multiple APN access networks |
System assurance | Support system auto-detection mechanism, system anomaly or crash automatic recovery |
Data link assurance | Built-in link maintenance and self-recovery mechanisms |
Firewall | Support flexible access control for TCP, UDP, and ICMP packets; Supports port mapping, NAT and other functions |
DDNS | Support some service providers, other service providers can manually configure |
Firmware upgrade | Support local webUI and remote OTA to upgrade firmware |
VLAN | Support VLAN function |
Embedded system | OpenWRT 18.06 |
Application development | Support secondary development of application functions based on our device motherboard software |